Back

 

Micromechanisms in Fracture and Fatigue

 

Micromechanisms of local plastic deformation, crack initiation and crack propagation in single crystals, structural materials and composites studied by means of theoretical and experimental approaches on atomistic, mesoscopic and multiscale levels.

 

 

 

Organizer and Chair: Jaroslav Pokluda

Address: Brno University of Technology, Faculty of Mechanical Engineering,

Technická 2, CZ 616 69, Brno, Czech Republic

Phone: + 420 541142827;               FAX : + 420 541142842

E-mail: pokluda@fme.vutbr.cz

 

Co-chair: Reinhard Pippan

Address: Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Jahnstrasse 12, 8700 Leoben, Austria

Phone:  +43 3842 804311;      FAX: +43 3842 804116   

E-mail: pippan@unileoben.ac.at

 

 

 

Preliminary program

 

 

Session I  Atomistics of Deformation and Fracture

 

1) Title: Ideal strength of nanoscale thin films

Corresponding Author: Takayuki Kitamura

Corresponding author address: Kyoto University, Graduate School of Engineering, Department of Engineering Physics and Mechanics

Yoshidahonmachi Sakyoku Kyoto, Japan

Phone: +81-75-753-5214;        FAX: +81-75-753-5214

E-mail: kitamura@kues.kyoto-u.ac.jp

Co-authors names, affiliations & country: Yoshitaka Umeno and Akihiro Kushima

 

2) Title: Slip processes and fracture in iron crystals

Corresponding Author: Anna Machova

Corresponding author address: Institute of Thermomechanics AS CR,

Dolejskova 5, 182 00 Prague 8, Czech Republic

Phone: :+420 2 6605 3023;          FAX: +420 2 86584695

E-mail: machova@it.cas.cz

Co-authors names, affiliations & country: V. Pelikan, P. Hora, M. Landa

 

3) Title: Multiscale modeling of fracture and plasticity in layered structures

Corresponding Author: Alexander Hartmaier

Corresponding author address: Max Planck Institute for Metals Research,

Heisenbergstr. 370569 Stuttgart, Germany

Phone: +49 711 689 3564;            FAX: +49 711 689 3512

E-mail: hartmaier@mf.mpg.de

 

4) Title: Ab initio calculation of strength of crystals containing nanocracks Corresponding Author: Miroslav Cerny

Corresponding author address: Brno University of Technology,

Faculty of Mechanical Engineering, Technicka 2, 616 69 Brno, Czech Republic

Phone: +420 541142825;              FAX: +420 541142842

E-mail: cerny.m@fme.vutbr.cz

Co-authors names, affiliations & country: Jaroslav Pokluda

 

5) Title: High-resolution neutron diffraction for residual strain/stress investigations

Corresponding Author: Pavol Mikula

Corresponding author address: Nuclear Physics Institute, 250 68 Rez, Czech Republic

Phone:  +420-266173553;  Fax.: +420-220940141                      

E-mail: mikula@ujf.cas.cz

 

Session II  Deformation and Fracture of Structural Materials and

Components

 

1) Title: Relating cleavage crack nucleation to cracked carbides in A533B steel

Corresponding Author: Steve G. Roberts

Corresponding author address: Department of Materials, University of Oxford,

Parks Road, Oxford OX1 3PH, U.K.

Phone:            FAX:

E-mail: steve.roberts@materials.oxford.ac.uk

Co-authors names, affiliations & country: Akshay Kumar

 

2) Title: Toughness Variability

Corresponding Author: W.R. Tyson

Corresponding author address: Materials Technology Laboratory,

Natural Resources Canada, 568 Booth St., Ottawa, Canada K1A 0G1

Phone:                                                FAX:

E-mail: btyson@nrcan.gc.ca

Co-authors names, affiliations & country: R. Bouchard, G. Shen

 

3) Title: Fractography of Sintered Steels 

Corresponding Author: Eva Dudrova

Corresponding author address: Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 043 53 Kosice, Slovak Republic 

Phone: +421 557922 111;                   FAX: +421 557922 408
E-mail: dudrova@imrnov.saske.sk

 

4) Title: Fatigue and fracture processes in tool steels

Corresponding Author: Gerhard Jesner

Corresponding author address: Erich Schmid Institute of Materials Science,

Austrian Academy of Sciences, Jahnstrasse 12, 8700 Leoben, Austria

Phone: +43 3842 804311;                   FAX: +43 3842 804116   

E-mail: pippan@unileoben.ac.at

Co-authors names, affiliations & country: Reinhard Pippan

 

5) Title: The Nature of ductile-to-brittle Transition in Amorphous Fe-Based Alloys.

Corresponding Author: A.M.Glezer

Corresponding author address: G.V.Kurdyumov Institute for Physical Metallurgy of Russian State Science Center for Ferrous Metallurgy, Moscow, 105005, Russia

Phone:                   FAX:    

E-mail: Glezer@imph.msk.ru

 

 

 

 

 

6) Title: Studies on cracks and fracture in coated cemented carbide tools

Corresponding author: Marianne Collin

Corresponding author address: Sandvik Tooling R&D, SE-126 80 Stockholm, Sweden

Phone:                         FAX:                       

E-mail: marianne.collin@sandvik.com

 

7) Title: Mathematical modeling for plastic deformation by slip in dispersion hardened alloys

Corresponding Author: S. N. Kolupaeva

Corresponding author address: Tomsk State University of Architecture and Building, Solyanaya sq. 2, Tomsk, 634003, Russia

Phone: (+7 3822) 659090;  FAX: (+7 3822) 653530

E-mail: vir@mail.tomsknet.ru

Co-authors names, affiliations & country: O. I. Daneyko, T. A. Kovalevskaya

 

 

 

Session III  Uniaxial Fatigue of Structural Materials and Components

 

1) Title: Model of microstructure formed in cyclically deformed metal single crystal

Corresponding Author: Jan Kratochvil

Corresponding author address: Czech Technical University, Faculty of Civil Engineering, Thakurova 7, 166 29 Prague 6, Czech Republic

Phone: 420-224354701; FAX: 420-233333226

E-mail: kratochvil@fsv.cvut.cz

 

2) Title:  Propagation of microcracks and their interaction with grain boundaries: systematical investigation of the mechanisms

Corresponding Author: M. Marx

Corresponding author address: Saarland University,

Institute of Materials Science and Methods, Building 43B,

D-66041 Saarbrücken, Germany

Phone:                                                FAX:

E-mail: m.marx@matsci.uni-sb.de

Co-authors names, affiliations & country: W. Schäf, H. Vehoff  

 

3) Title: Dislocation arrangements in cyclically strained INCONEL 713LC

Corresponding Author: Jaroslav Polák

Corresponding author address: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno, Czech Republic Phone: +420 532290366 FAX: +420 541212301

E-mail: polak@ipm.cz

Co-authors names, affiliations & country: M. Petrenec, K. Obrtlík

 

4) Title: Early stages of fatigue damage in 316L steel

Corresponding Author: Jaroslav  Polák

Corresponding author address: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno, Czech Republic Phone: +420 532290366;                  FAX: +420 541212301

E-mail: polak@ipm.cz

Co-authors names, affiliations & country: J. Man, K. Obrtlík, IPM AS CR Brno and P. Klapetek, Czech Metrology Institute, Brno.

 

5) Title: Fatigue lifetime of bearing steel in very-high-cycle region
Corresponding author: Ludvik Kunz

Corresponding author address: Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno, Czech Republic

Phone: 549 246 327;                   FAX:  541 212 301

E-mail: kunz@ipm.cz

Co-authors names, affiliations & country: P. Lukas, IPM ASCR Brno and M. Cincala, Zilina University, Velký diel, Zilina, Slovak Republic

 

Session IV  Multiaxial Fatigue and Wear of Structural Materials

 

1) Title: Micromechanisms of fatigue damage under cyclic biaxial loading of a duplex stainless steel.

Corresponding Author: Suzanne Degallaix

Corresponding author address: Laboratoire de Mécanique de Lille (LML, UMR CNRS 8107), Ecole Centrale de Lille, BP 48, 59651 Villeneuve d'Ascq Cedex, France

Tél. Fax.

Mél : Phone: 0320335378; FAX : 0320335499

E-mail: suzanne.degallaix@ec-lille.fr

Co-authors names, affiliations & country: Véronique Aubin, Ahmed El Bartali  

 

 

2) Title: Critical and fracture plane of 18G2A steel under non-proportional bending with torsion

Corresponding Author: Ewald Macha

Corresponding author address: Technical University of Opole, Faculty of Mechanical Engineering, Department of Mechanics and Machine Design,

ul. St. Mikołajczyka 5, 45-271 Opole, Poland

Phone:            FAX:

E-mail: emac@po.opole.pl

Co-authors names, affiliations & country: A. Karolczuk

 

3) Title: Influence of torsion component on fracture surface morphology in bending-torsion fatigue

Corresponding Author: Jaroslav Pokluda

Corresponding author address: Brno University of Technology, Faculty of Mechanical Engineering, Technická 2, CZ 616 69 Brno, Czech Republic

Phone: +420 541142827;               FAX : +420 541142842

E-mail: pokluda@fme.vutbr.cz

Co-authors names, affiliations & country: K. Slamecka   

 

4) Title: Fatigue crack growth for different ratios of bending to torsion in AlCu4Mg1

Corresponding Author: Ewald Macha

Corresponding author address: Technical University of Opole, Faculty of Mechanical Engineering, Department of Mechanics and Machine Design,

ul. St. Mikołajczyka 5, 45-271 Opole, Poland

Phone:            FAX:

E-mail: emac@po.opole.pl

Co-authors names, affiliations & country: D. Rozumek  

 

 

 

5) Title: Wear mechanisms’ fractographical study of selected thermally sprayed coatings

Corresponding Author: S. Houdkova

Corresponding author address: Skoda Research Ltd., Tylova 57, Plzeň, 31600,

Czech Republic

Phone: +420 532290366;                    FAX: +420 541212301

E-mail: sarka.houdkova@skoda.cz

Co-authors names, affiliations & country: J. Nohava, Institute of Plasma Physics, Za Slovankou 3, P.O. Box             7, 18 200  Praha 8, Czech Republic and  R. Enzl,  Skoda Research Ltd.

             

6) Title: Tribological properties and wear mechanisms of wear resistant thermally sprayed coatings

Corresponding author: S. Houdkova

Corresponding author address: Skoda Research Ltd., Tylova 57, Plzeň, 31600,

Czech Republic

Phone: +420 532290366;                    FAX: +420 541212301

E-mail: sarka.houdkova@skoda.cz

Co-authors names, affiliations & country: F. Zahálka, Department of Materials Science and Metallurgy, University of West Bohemia, Univerzitní  8, 32000 Plzen, Czech Republic and R. Enzl, Skoda Research Ltd.

 

 

 Session V Fracture of Ultra-Fine Grained Materials

 

1) Title: Thermo-mechanical behaviour of nanostructured copper.

Corresponding Author: Yannick Champion

Corresponding author address: Centre d'Etude de Chimie Metallurgique - CNRS, UPR280115 rue Georges Urbain 94407 Vitry-sur-Seine, Cedex.

Phone: 00 33 (0)1 56 70 30 55;                FAX: 00 33 (0)1 46 75 04 33

E-mail: yannick.champion@glvt-cnrs.fr

 

2) Title: Defect studies of ultra fine grained Mg-based alloys deformed by high-pressure torsion

Corresponding Author: Jakub Čížek

Corresponding author address: Department of Low-Temperature Physics,

Faculty of Mathematics and Physics, Charles University in Prague, V Holešovičkách 2, CZ-180 00 Praha 8, Czech Republic

Phone: +420 221912788;                                        FAX: +420 221912567

E-mail: jcizek@mbox.troja.mff.cuni.cz

Co-authors names, affiliations & country: I. Procházka, B. Smola, I. Stulíková, R. Kužel, Z. Matěj, V. Cherkaska, FMP Prague and K. Islamgaliev, O. Kulyasova, Ufa State Aviation Technical University, Russia

 

3) Title: Fracture processes in tungsten alloys

Corresponding Author: Reinhard Pippan

Corresponding author address: Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Jahnstrasse 12, 8700 Leoben, Austria

Phone:  +43 3842 804311;                    FAX: +43 3842 804116  

E-mail: pippan@unileoben.ac.at

Co-authors names, affiliations & country: Mario Faleschini

 

4) Title: In-situ investigations of the fracture mechanisms at various length

scales

Corresponding Author:  Krzysztof J. Kurzydlowski

Corresponding author address: Warsaw University of Technology, Faculty of Materials Science and Engineering, Woloska 141, 02-504 Warszawa

Phone:                        FAX:

E-mail: kjk@inmat.pw.edu.pl

 

 

 

5) Title: Features of superplastic flow of nanostructural alloys fracture processes in tungsten alloys

Corresponding Author: M. M. Myshlyaev

Corresponding author address: Institute of Solid State Physics, RAS, 142432 Chernogolovka, Russia,

Phone:                             FAX:  

E-mail: myshlyae@issp.ac.ru

Co-authors names, affiliations & country:  S.Yu. Mironov, Institute of Metal Superplastisity Problems, 39 Khalturina str., 450001 Ufa, Russia,  E.V. Konovalova, University of Surgut, 14 Energetikov str., 628400 Surgut, Russia, M. M. Myshlyaeva,  Institute of Solid State Physics, RAS, 142432 Chernogolovka, Russia

 

6) Title: Fracture mechanism of low carbon steel in the presence of nonmetallic inclusions on boundaries of initial austenite grains

Corresponding Author: A. V. Kudria

Corresponding author address: Moscow Institute of Steel and Alloys, Russia

Phone:                             FAX:  

E-mail: myshlyae@issp.ac.ru

Co-authors names, affiliations & country: A. M. Arsenkin , N.A. Shurygina

 

 

Session VI Fatigue of Ultra-Fine Grained Materials and Components

 

1) Title:  Fatigue of fine-grained magnesium

Corresponding Author: Yuri Estrin

Corresponding author address: Department of Materials Science and Technology, Clausthal University of Technology, Agricolastrasse 6, D-38678 Clausthal-Zellerfeld, Germany

Phone: (+49) 53 23-72 2002, FAX: (+49) 53 23-72 3148

E-mail: juri.estrin@tu-clausthal.de

Co-authors names, affiliations & country: Torbjörn Lamark

 

2) Title: Fatigue crack growth in ultrafine grained Ni processed by severe plastic deformation

Corresponding Author:  Krzysztof J. Kurzydlowski

Corresponding author address: Warsaw University of Technology, Faculty of Materials Science and Engineering, Woloska 141, 02-504 Warszawa, Poland

Phone:                        FAX:

E-mail: kjk@inmat.pw.edu.pl

Co-authors names, affiliations & country: Zbigniew Pakiela, Warsaw University of Technology and Nikolay Krasilnikov, Institute of Physics of Advanced Materials, USATU, Ufa, Russia

 

3) Title: Computer assisted design of decreased friction materials

Corresponding Author: Jaroslav  Vacek

Corresponding author address: University of Colorado at Boulder, Department of Chemistry Boulder, CO, 80309-0215 & Institute of Organic Chemistry and Biochemistry, Flemingovo nam. 2, Prague 6, 166 10, Czech Republic

Phone:                            FAX: +43 3842 804116;   

E-mail: vacek@eefus.colorado.edu

 

4) Title:  Fatigue and fracture processes in severe plastic deformed rail steels

Corresponding Author:  Reinhard Pippan

Corresponding author address: Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Jahnstrasse 12, 8700 Leoben, Austria

Phone:  +43 3842 804311;                 FAX: +43 3842 804116   

E-mail: pippan@unileoben.ac.at

Co-authors names, affiliations & country: Florian Wetscher

 

  

 

Session VII Fracture and Damage of Composites and Layered Materials

 

1) Title:  Crack initiation and fracture of metal matrix composites

Corresponding Author: Otmar Kolednik

Corresponding author address: Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Jahnstrasse 12, 8700 Leoben, Austria

Phone: +43 3842 804 114;  FAX: +43 3842 804116  

E-mail: kolednik@unileoben.ac.at

Co-authors names, affiliations & country: Klaus Unterweger

 

2) Title: The feature of tensile fractography of in situ strengthened magnesium matrix composite Mg2Si/ZM5

Corresponding Author:  Kuang-Wu QIAN

Corresponding author address: College of Materials Science and Engineering, Fuzhou University, Fuzhou, Fujian Province 350002, China

Phone: 086-591-8789-1048(O); 086-591-9371-1464(H);             FAX:

E-mail: qkw@fzu.edu.cn

 

3) Title:  DTA and TMA – the new methods for investigation of composite material’s condition

Corresponding Author: Vaclav Mentlik

Corresponding author address: Faculty of Electrical Engineering, University of West Bohemia, Pilsen, Czech Republic

Phone:                         FAX:

E-mail: mentlik@ket.zcu.cz

Co-authors names, affiliations & country: R. Polansky

 

4) Title: Crack Propagation in a Layered Al2O3-ZrO2 System

Corresponding Author: Jan Dusza

Corresponding author address: Institute of Materials Research, SAS

Watsonova 47 043 53 Kosice Slovak Republic

Phone: +421-55-7922462;      FAX: +421-55-408

E-mail: dusza@imrnov.saske.sk

 

5) Title: The Si3N4 based structural ceramics: synthesis and properties

Corresponding Author: Snezana Boskovic

Corresponding author address: Institute of Nuclear Sciences Vinca, POB 522, 11001 Belgrade, Serbia and Montenegro

Phone:                            FAX:

E-mail: boskovic@vin.bg.ac.yu

Co-authors names, affiliations & country: B. Matovic, A. Vuckovic, D. Bucevac, Institute of Nuclear Sciences Vinca and L. J. Zivkovic, Faculty of Electronuic Engineering, University of Nis, Serbia and Montenegro

 

 

6) Title: Calculation of stress intensities and T-stresses for crack arrested at anisotropic/anisotropic material interface

Corresponding Author: Michal Kotoul

Corresponding author address: Brno University of Technology, Faculty of Mechanical Engineering, Technická 2, CZ 616 69, Brno, Czech Republic

Phone: + 420 541142886;               FAX :

E-mail: kotoul@fme.vutbr.cz

Co-authors names, affiliations & country: T. Profant

 

7) Title: Modelling crack-tip shielding effects in particle reinforced composites

Corresponding Author: Jaroslav Pokluda

Corresponding author address: Brno University of Technology, Faculty of Mechanical Engineering, Technická 2, CZ 616 69, Brno, Czech Republic

Phone: +420 541142827;               FAX: +420 541142842

E-mail: pokluda@fme.vutbr.cz

Co-authors names, affiliations & country: J. Hornikova, P.  Sandera    

 

 

 

Session VIII  Environmentally and Temperature Assisted Fracture and                                     Fatigue

 

1) Title:  Stress-driven diffusion to a slowly moving crack and crack growth behaviour

Corresponding Author:  P. Streitenberger

Corresponding author address: Institut für Experimentelle Physik, Otto-von-Guericke-Universität Magdeburg, Abteilung Materialphysik, Postfach 4120, D‑39016 Magdeburg, Germany

Phone: 0049 391 6718581;  FAX: 0049 3916718108

E-mail: peter.streitenberger@physik.uni-magdeburg.de

 

2) Title: Fatigue behaviour of metallic materials exposed to

high pressure hydrogen environments

Corresponding Author: Yoji Mine

Corresponding author address: Department of Mechanical Engineering and Science, Kyushu University, Hakozaki, Higashi-ku, Fukuoka 812-8581, Japan

Phone:                            FAX:

E-mail: mine@mech.kyushu-u.ac.jp

Co-authors names, affiliations & country: Yukitaka Murakami

 

3) Title: Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy

Corresponding Author: Bernard Fedelich

Corresponding author address: Federal Institute for Materials Research and Testing, Division V.2 Mechanical Behaviour of Mater., D-12200 Berlin, Germany

Phone: +49 30 8104 3104;              FAX : +49 30 8104 1527

E-mail: bernard.fedelich@bam.de

 

4) Title: Quantitative evaluation of acceleration creep characteristics

in binary magnesium-alloys at around 0.6Tm

Corresponding Author: Hiroyuki Sato

Corresponding author address: Department of Machines and System Engineering, Faculty of Science and Technology, Hirosaki University,

Bunkyo-3, Hirosaki, Aomori, 036-8561 JAPAN

Phone:                         FAX:

E-mail: g4sato@mech.hirosaki-u.ac.jp

 

5) Title: Thermal cycling behaviour and martensite stabilization   in shape memory CuZnAl alloys

Corresponding Author: Osman Adiguzel 

Corresponding author address: Firat University, Department of Physics, 23169 Elazig/Turkey

Tel.: 0090 424 2370000(10 lines)/ext 3364; Fax: 0090 424 2330062

e-mail:  oadiguzel@firat.edu.tr, oadiguzel@hotmail.co

Co-authors names, affiliations & country: Necdet Kayali

Back

Top